TAPMATIC DeBurr-Z CNC FLOATING DEBURRING TOOL

The DeBurr-Z deburring tool is an axially (Z axis) floating tool holder, for use on CNC machines, designed for deburring or chamfering the sharp edges of a work piece. The floating holder allows the burr cutting tool to follow the edges of the part even when these are not clearly defined or vary in position like in the case of castings, cross holes or intersecting surfaces.

The DeBurr-Z compensates in both the compression and the extension direction allowing you to deburr both the top edges and underside edges of the work piece.

There are 10mm of both compression float and extension float and the force exerted against the work piece edge can be adjusted for harder work piece materials or to increase the size of the edge break.

The force adjustment works equally and simultaneously in both the compression and extension direction and making an adjustment does not affect the tool length.

Neighbouring tools and collision areas in the machine’s tool magazine will normally not pose a problem thanks to the compact design.

Maximum recommended speed is 10,000 RPM.

The feed rate can be programmed based on the material, and the desired edge break size and finish.

Using external flood coolant / lubrication, results in the longest tool life and best finish.

Burr cutting tools with angular and spherical profiles can be used.

For more information, please contact Duncan Macdonald – Tel: 011 444-4345.

Visit Duncan Macdonald